feat: main.py with OLED display and config.json support

main.py

@@ -0,0 +1,128 @@
+# ============================================================+
+# Identity IoT — main.py for Pico W2
+# Config from config.json — OLED display integrated
+# ============================================================+
+
+import network
+import utime
+import ujson
+from machine import Pin, I2C
+from ssd1306 import SSD1306_I2C
+from identity_iot import IdentityIoT
+
+# ---- OLED ----
+i2c  = I2C(0, sda=Pin(4), scl=Pin(5))
+oled = SSD1306_I2C(128, 64, i2c)
+
+def show(lines):
+    oled.fill(0)
+    for i, line in enumerate(lines):
+        oled.text(line[:16], 0, i * 12)
+    oled.show()
+
+def show_scroll(text, row=0, delay=0.04):
+    """Scroll long text on a single row."""
+    if len(text) <= 16:
+        return
+    for i in range(len(text) - 15):
+        oled.fill_rect(0, row * 12, 128, 12, 0)
+        oled.text(text[i:i+16], 0, row * 12)
+        oled.show()
+        utime.sleep(delay)
+
+# ---- Config ----
+def load_config():
+    with open('config.json') as f:
+        return ujson.load(f)
+
+def connect_wifi(cfg):
+    show(['Identity IoT', 'WIDE / AEL', '', 'Connecting...'])
+    wlan = network.WLAN(network.STA_IF)
+    wlan.active(True)
+    utime.sleep(2)
+
+    if not wlan.isconnected():
+        wlan.connect(cfg['wifi_ssid'], cfg['wifi_pass'])
+        timeout = 30
+        while timeout > 0:
+            if wlan.isconnected() and wlan.ifconfig()[0] != '0.0.0.0':
+                break
+            utime.sleep(1)
+            timeout -= 1
+
+    if not wlan.isconnected() or wlan.ifconfig()[0] == '0.0.0.0':
+        show(['WiFi FAILED', '', 'Check config', ''])
+        raise Exception('WiFi failed')
+
+    if cfg.get('wifi_static'):
+        wlan.ifconfig((
+            cfg['wifi_ip'],
+            cfg['wifi_mask'],
+            cfg['wifi_gw'],
+            cfg['wifi_dns'],
+        ))
+
+    ip = wlan.ifconfig()[0]
+    show(['WiFi OK', ip, '', ''])
+    utime.sleep(1)
+    return wlan
+
+# ---- Main ----
+def main():
+    show(['Identity IoT', 'WIDE / AEL', 'v1.0', 'Boot...'])
+    utime.sleep(1)
+
+    cfg = load_config()
+    connect_wifi(cfg)
+ 
+ 
+
+    identity = IdentityIoT(
+        base_url   = cfg['base_url'],
+        node_type  = cfg.get('node_type', 'sensor'),
+        node_label = cfg.get('node_label', ''),
+        tenant_id  = cfg['tenant_id'],
+        comm_key   = cfg['comm_key'].encode(),
+        comm_iv    = cfg['comm_iv'].encode(),
+        wifi_ssid  = cfg['wifi_ssid'],
+        wifi_pass  = cfg['wifi_pass'],
+    )
+
+     # Register con retry visibile
+    for attempt in range(3):
+        try:
+            show(['Registering...', 'attempt ' + str(attempt+1) + '/3', '', ''])
+            reg = identity.ensure_registered()
+            break
+        except Exception as e:
+            print('register failed:', e)
+            if attempt == 2:
+                show(['FAILED', 'Check network', '', ''])
+                raise
+            utime.sleep(3)
+
+    # Register
+   
+    reg = identity.ensure_registered()
+    uid_short = reg.get('node_uid', '')[:12] + '...'
+    show(['Node ' + reg.get('result',''), uid_short, '', ''])
+    utime.sleep(1)
+
+    # Authenticate
+    show(['Challenge...', '', '', ''])
+    utime.sleep(0.5)
+    show(['Signing...', '', 'Please wait', ''])
+    token = identity.authenticate()
+
+    if token:
+        show(['VERIFIED', '', 'JWT issued', ':)'])
+    else:
+        show(['AUTH FAILED', '', 'Check backend', ''])
+
+    utime.sleep(2)
+
+    # Idle — show node UID
+    uid = identity.get_node_uid()
+    show(['Identity IoT', 'Active', uid[:16], uid[16:32]])
+
+main()